Environmental Protection; Hints And Tips; Accessories; Technical Specifications - Metabo BSP 12 Plus Mode D'emploi

b Screw off the chuck (1) using an open ended
spanner (13).
Replace the chuck by reversing the above
procedure.
Cleaning
Clean from time to time by holding the tool with
the rapid-action keyless chuck facing vertically
downwards and twist the sleeve as far as it will
go towards "GRIP, ZU", and then turn back fully
in the opposite direction ("AUF, RELEASE").
The dust which has accumulated will fall out of
the chuck.

8 Hints and Tips

Drilling
Use of 2nd gear is recommended (higher
speed).
Switch on impulse mode for drilling into steel,
aluminium or tiles, with no need for preliminary
centre-punching and pilot drilling.
Driving screws
Use of 1st gear is recommended (low speed),
and with the torque control feature in operation.
When driving screws with deformed heads in
wood, switch on impulse mode.
Switch on impulse mode to achieve maximum
torque when driving screws.
Tapping threads
Apply a light film of oil to the tap.
Select 1st gear (low speed).
Switch on torque control.

9 Accessories

Use original Metabo accessories only.
To assist in selecting the correct accessories,
make sure that you take a note of the exact
model of your tool for your dealer.
A Charger
B Holster
C Battery packs of varying capacities
Buy only battery packs of the correct
voltage for your cordless tool.
For complete range of accessories, see
www.metabo.com or the main catalogue.
10 Repairs
Repairs to power tools must be carried
out by a qualified electrician only.
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please attach a description of the fault to the
tool.

11 Environmental Protection

Metabo packaging is 100% suitable for
recycling.
Power tools and accessories at the end of their
service life still contain large amounts of
valuable raw materials and plastics which can
likewise be fed back into a recycling process.
These Operating Instructions are printed on
paper produced in a chlorine-free bleaching
process.
Battery packs must not be disposed of along
with domestic waste.
Return any faulty or exhausted battery packs to
your Metabo dealer.
Do not throw battery packs away in water.
Only for EU countries: Do not dispose of
electric tools together with household waste
material! In observance of European
Directive 2002/96/EC on waste electrical and
electronic equipment and its implementation in
accordance with national law, electric tools that
have reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.

12 Technical Specifications

Notes on the information printed on page 2.
We reserve the right to undertake modifications
to reflect technical advances.
U = battery-pack voltage
n = no-load speed
Tightening torque when driving screws:
M = driving into soft materials (wood)
1
M = impulse torque
2
M = driving into hard materials (metal)
3
M = adjustable tightening torque
4
ENGLISH
ENG
13