Installation - IKEA VÄRMA Mode D'emploi

Masquer les pouces Voir aussi pour VÄRMA:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH

Installation

Mounting the appliance
Follow the supplied separate mounting
instructions when installing the appliance.
Installation and repairs must be carried out
by a qualified technician, in compliance with
the manufacturer's instructions and local
safety regulations. Do not repair or replace
any part of the appliance unless specifically
stated in the user manual.
Children should not perform installation
operations. Keep children away during
installation of the appliance. Keep the
packaging materials (plastic bags,
polystyrene parts, etc.) out of reach of
children, during and after the installation of
the appliance.
Use protective gloves to perform all
unpacking and installation operations.
The appliance must be handled and
installed by two or more persons.The
appliance must be disconnected from the
power supply before carrying out any
installation operation.
After unpacking the appliance, make sure
that it has not been damaged during
transport. In the event of problems, contact
the dealer or your nearest After-sales
Service.
After unpacking the appliance, make sure
that the appliance door closes properly.
In the event of problems, contact the dealer
or your nearest After-sales Service. To
prevent any damage, only remove the oven
from its polystyrene foam base at the time
of installation.
During installation, make sure the appliance
does not damage the power cable.
23

Publicité

Table des Matières
loading

Table des Matières