Removing And Replacing The Led Masks - Chauvet Professional F3 Mode D'emploi

Removing and Replacing the LED Masks

To replace one of the LED masks on an F3 LED module, follow the instructions below:
1. Remove the module from the F3 (see
2. Gently lift the edges of the mask with a thin prying tool.
• A dull plastic prying tool is recommended to prevent LED damage.
• Bending the mask too much will permanently stretch it beyond usability.
3. Work the prying tool toward the center, gently lifting the mask from the LEDs.
4. Align the new LED mask so the arrow on the back points up, with the orientation of the text on the
LED LOT # label of the module.
5. Press the mask firmly onto the module so it snaps in place.
23
LED Module Care and Replacement
4x8 = 32 Masks
per Module
F3 LED Module Removal with MT-03).
F3 User Manual Rev. 4