Assembling & Preparing Your Grill; Install Casters; Install Grill Head - Jackson Grills JSS550BI-LP Mode D'emploi

Assembling & Preparing your Grill:
◼ Install Casters:
1. Install locking casters at the front, and the non-locking casters at the rear of your grill.
2. Using a screw driver, install the casters by bolting them into the bottom 4 corners of your grill using 16 M6 screws
(supplied) and 16 M6 spring washers.
◼ Install Grill Head:
Step One: Remove the 4 outer screws in the grill head to allow grill head to slide into cart. Screws and washers will
be required for Step 2 (Keep the nuts in a safe place such as with the manual as they are not required when installing
the cart).
Step Two: Before fully sliding the grill into the cart, connect the main manifold to the Stainless-Steel flex hose in the
cart (A to B).
A B
4