Preparing Your Grill For Operation - Jackson Grills JPG50 Manuel D'utilisation

PREPARING YOUR GRILL FOR OPERATION

STEP 1:
With the hood closed and latch in the closed position, lay the portable grill on its back and flip down the
fold down leg system.
STEP 2:
Place the unit in the upright position and screw in the supplied portable regulator. Do not over tighten;
finger tight is sufficient, but the fitting can be LIGHTLY tightened with a small crescent wrench.
STEP3:
Make sure a battery (supplied) is installed in the ignition module. To do so, unscrew the black igniter
button by turning it counter clockwise. The igniter only works if the battery is installed in the correct
direction.
Flip down the fold down
leg system.
Screw the portable regulator
into the side of the control
box. Do not over tighten.
7