Tools Required For Assembly; Assembling And Preparing Your Grill - Jackson Grills Versa 75 Manuel Du Propriétaire

1 x # 2 Phillips Screw Drivers
1 x Small Crescent Wrench
•
Please ensure all components have been supplied with this appliance before assembly or operation begins.
•
Please remove all packaging materials before using this portable grill.
Assembling & Preparing Your Grill:
STEP 1:
Install the firebox handles by screwing them to the sides of the grill
head as seen right:
STEP 2:
Install the black lid handles by opening the hood and placing the
hood handle spacers (wide side down) over the handle mounting holes.
Place the handle on the handle spacer and screw in the bolts
from inner side of the hood. Do not over tighten and be careful
not to cross thread the bolts into the handle.
Step 5:
Place the unit in the upright position and screw in the supplied portable regulator (Fig. 1). Do not over tighten.
Lubricate the threads of the regulator valve with petroleum jelly or grease. Insert a 1 lb. gas cylinder onto the regulator
valve and hand tighten firmly. Disconnect the gas cylinder when the appliance is not in use. DO NOT obstruct the flow
of combustion air and ventilation air to this portable grill.
Screw the brass nut of the
regulator into the side of the
control box.
Fig. 1

Tools Required for Assembly:

!WARNING!
Use ONLY the Regulator supplied
with this Grill. Use ONLY authorized
Jackson Replacement Parts.
2
1
STEP 3:
Insert diffuser into holes located at the bottom of the inner grill
tub. (Left)
STEP 4:
Insert grill grates into the support holes (3 grates, 12 holes).
7
2
1