SETTING FAX DATE AND TIME
To set the date and time manually when you switch on the printer:
•
In stand-alone mode, press the Menu key. The message "SET DATE/TIME" is displayed.
Enter the date and time using the alphanumeric keypad and press Confirm again at the end.
•
You can also send the date and time from the computer by selecting Toolbox > Settings > Fax settings.
USING THE PRINTER WITHOUT A COMPUTER
COPYING A DOCUMENT
1
Switch on the printer. See "Switching the Printer On and Off".
2
Make sure that the out-of-ink indicators on the front panel are switched off. If either indicator is on, you should
replace the corresponding ink cartridge.
For more information, see "Replacing the Ink Cartridges".
3
Load the paper on which you want to print.
4
Place the document you want to copy on the scanner glass or, if it consists of multiple pages, in the automatic
document feeder.
5
Select the copy quality: Photo or Normal, pressing the Select print quality key.
a
To copy a normal B/W text, or a mixed document in B/W and colour, select Normal.
b
To copy a document and print it on special ink-jet paper, select Photo. For more information, see "Printer
Keyboard".
6
Select the contrast: dark, medium or light, pressing the Copy contrast key. For more information, see "Printer
Keyboard".
7
To make more than one copy, press the "+" (plus) key the number of times necessary to display the number of
copies required on the counter.
12
QUICK REFERENCE GUIDE