LEDS ON THE PRINTER FRONT PANEL
Open out the keyboard to access the compartment where the LEDs can be seen.
Reference
Indicator
USB status
1
2
Fax present
in memory
3
Paper error
4
Out-of-ink
CONNECTING A DIGITAL CAMERA TO THE PRINTER
1
Switch on the digital camera. For more information, read the digital camera's User Guide.
2
With the printer switched on, connect one end of the USB cable to the USB connector of the digital camera, and
the other end to the USB connector on the printer front panel. The connection LEDs and the Start printing key
icon illuminate.
Note: If you are connecting a PictBridge digital camera, the Start printing key icon does not illuminate because
printing is controlled directly from the digital camera.
6
QUICK REFERENCE GUIDE
Description
•
A green light indicates that a digital camera or compatible memory
device is connected. A flashing light indicates that data is being
transferred to the printer.
•
A fax is present in memory (i.e. was not printed when it was
received).
The printer cannot be switched off without correcting the reason for
the error, and printing the faxes present in memory.
•
A fax transmission or reception error has occurred.
Indicates:
•
Paper jam.
•
No paper in feeder.
LED flashes when the black, photo or colour cartridges are nearly out of
ink. A steady orange light indicates that the ink has run out.