Clock Alarm - NEC N400i Mode D'emploi

Calculating using the temporary memory
To calculate using the temporary memory for example 5 x (25 - 5):
☛
With the Calculator screen displayed, key in 25.
☛
Press the key.
☛
Key in 5.
☛
Press .
The answer 20 will be displayed in the calculation field.
☛
Press Softkey 2 to add the displayed number into memory.
☛
Key in 5.
☛
Press the ▲ key.
☛
Press Softkey 1.
20 will be displayed in the field.
Pressing Softkey 1 again will clear the memory.
☛
Press .
The answer 100 will be displayed in the calculation field.

Clock alarm

This feature enables you to switch the clock alarm function on/off and to set the time, repetition and alarm tone.
Turning the alarm on
☛
With the standby screen displayed, press
☛
Use the and keys to highlight On and press
☛
Use the ▲ and ▼ keys to highlight the time field and key in the time.
☛
Use the ▲ and ▼ keys to highlight the alarm tone field and press
See also: "Sounds" on page 69.
☛
Highlight the repeat setting field and press
Softkey 1 to save the setting.
•
If you select Day of the week, highlight and press
You can select more than one day of the week at the same time.
You can remove the check by highlighting and pressing
☛
Use the ▲ and ▼ keys to highlight the alarm text field, press
8 and 2 to display the Set alarm screen.
.
to display the sounds folders. Highlight a tone for the alarm and press
to display the repeat settings. Highlight the required repeat setting and press
to place checks for the required days before pressing Softkey 1 to save the setting.
again.
, key in the message (e.g. Wake up!) and then press
.
, and then press
.
75