Answer Options - NEC N400i Mode D'emploi

Answer options

Any key answer
When this facility is active, you can connect your phone to a received call by pressing any key (except
is turned off, you can connect to a received call by pressing
☛
With the standby screen displayed, press
☛
Press 1 to activate or 2 to deactivate the any key answer.
Ring silencer
When your phone is folded and the ring silencer is active, you can stop the ringer sound while receiving a call or message by pressing one of the Side
keys.
☛
With the standby screen displayed, press
☛
Press 1 to activate or 2 to deactivate the ring silencer.
When your phone is folded and the Side key function is disabled, you cannot use the ring silencer function by pressing the Side keys.
See also: "Mute" on page 8.
Fold answer
When your phone is folded and the fold answer facility is active, you can answer an incoming call by opening your phone.
☛
With the standby screen displayed, press
☛
Press 1 to activate or 2 to deactivate the fold answer facility.
Activating Side keys
The Side keys will be enabled/disabled while your phone is closed.
☛
With the standby screen displayed, press
☛
Press 1 to enable or 2 to disable the Side keys while your phone is closed.
You can also enable or disable the Side keys by pressing and holding
ALS setup
The ALS facility is SIM card and network dependent.
If your SIM card supports ALS (Alternate Line Service) you can setup which line to use, the line names and automatic line selection.
☛
With the standby screen displayed, press
Outgoing call
☛
With the ALS setup screen displayed, press 1.
19
or Softkey 1 only.
1, 1, 2 and 1.
1, 1, 2 and 2.
1, 1, 2 and 3.
1, 1 and 3.
on the standby screen.
1, 1 and 4 before performing the following procedures.
, Softkey 2, the Side keys). When this facility