Numeric Input; Key Allocations; Symbol Mode - NEC N400i Mode D'emploi

If you have made a mistake, use the ▲ ▼
When entering normal (ABC) text, and the character you require is displayed, press the
more than 1 second, the cursor will move one character to the right automatically).

Numeric input

☛
With a text entry screen displayed, press Softkey 1 until the entry mode is Numeric input.
☛
Use alphanumeric keys to enter numbers.

Key allocations

Whenever you need to enter text (for short messages, storing names with numbers, etc.), successive presses of an alphanumeric key will display different
®
characters. Pressing in T9
(permanent upper case). Whenever a text entry screen is displayed, pressing Softkey 1 enables you to select Normal text input (ABC), T9
(T9) or Numeric input (123).

Symbol mode

In the symbol mode, pressing each key will input a symbol according to its position on the Symbols screen. By pressing
Symbol screen will be displayed. Use the ▲ and ▼ keys to select the row, and then press the appropriate number on the column of the required symbol.
15
keys to place the cursor to the right of the incorrect character and then press CLR.
and
English text input or Normal text (ABC) input toggles between lower case, shift (upper case for one letter) and caps lock
key to move to the next character position (if you wait for
in a text entry mode, the
®
Text input