Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

When SIM PIN Lock is enabled, you can change the PIN code.
Changing your PIN code
With the Security screen displayed, press 1 and 1 to display the PIN change screen.
Key in the current code and press Softkey 1. You are prompted to enter the new code, and then to enter it again for confirmation. A
confirmation screen will be displayed momentarily and the Change PINs screen will be displayed.
PIN2 code
Your phone supports advanced feature that may require a PIN2 code to be entered before they can be accessed or modified. Entering your PIN2 code
incorrectly 3 times (not necessarily in the same session) will invalidate the correct PIN2 code. In this case you will have to contact your service provider
for a PUK2 code.
The PIN2 code is SIM card related and may only be available from your service provider.
Changing your PIN2 code
With the Security screen displayed, press 1 and 2 to display the PIN2 change screen.
Key in the current code and press Softkey 1. You are prompted to enter the new code, and then to enter it again for confirmation.
Security code
The security code is used to unlock the PIM features.
Changing your security code
With the Security screen displayed, press 1 and 3 to display the Security code screen.
The default setting of the security code is "0000".
Key in the current security code and press Softkey 1. You are prompted to enter the new code, and then to enter it again for confirmation.
PIN activate
With the Security screen displayed, press 2 to display the PIN activate screen.
Press 1 to activate or 2 to deactivate PIN codes. You may be prompted to enter the PIN code.

Phone lock

While the Phone lock is active, you are only allowed to make emergency calls and to enter the security code. When the Phone lock is active, the Phone
lock will be released only when the correct security code is entered. To activate/deactivate the Phone lock, use the following procedure.
Upon power-up, you are prompted to enter the security code if the Phone lock was active when the phone was powered down.
With the Security screen displayed, press 3 to display the phone lock screen. You will be prompted to enter the security code.
Key in the code and press Softkey 1. The phone locked message will be displayed.
27

Publicité

Table des Matières
loading

Table des Matières