Camera Options Menu - NEC N400i Mode D'emploi

Camera Options menu

Before taking a picture/recording a video
Camera Options menu
☛
With the standby screen displayed, press
You can also access the camera/video camera function by pressing
☛
Press to display the Camera Options menu screen (before taking a picture/recording a video).
☛
Press the appropriate key for the required option. Column P shows the Options menu after taking a picture, and column V shows the menu after
recording video:
P V Camera Options menu (before taking a picture/recording a video)
1 – Single mode/Burst mode
2 1 Shoot environment
3 2 Effect
– 3 Screen size
4 – Photo size
– 4 Video file size
5 – Image quality
6 – Frame
7 5 Self timer/Self timer cancel Activates or deactivates the self-timer function.
8 – Shutter sound
9 – Thumbnail view
6 View finder
0
to activate the camera function, or press and hold
Switches the shooting mode to Single/Burst mode (serial shooting).
When you take pictures in burst mode, the saved files will be named by the default file names plus a
consecutive three-digit number at the end.
Changes the camera settings to suit the environment. Select from Standard, Person, Room or Darkness.
Applies special effect to the taken picture. Select from Off, Sepia, Monochrome or Negative film.
Sets the video screen size to Sub-QCIF (W128*H96) or QCIF (W176*H144).
Sets the picture size to Sub-QCIF (W128*H96), QCIF (W176*H144), Wallpaper (W240*H320), or VGA
(W640*H480).
You cannot use the Zoom, Frame function and Burst mode for VGA sized pictures.
You cannot use the Burst mode for Wallpaper sized pictures.
If you select Wallpaper or VGA, the picture on your phone's display, the camera view finder screen will
be displayed as a smaller picture than the actual size. Also on the camera view finder screen, the picture
size before shooting differs from the size after shooting.
Sets the video size to mail size or normal size.
Sets the image quality to Super fine, Fine, Normal, Economy or Super economy.
Selects whether to use a frame when taking pictures, and sets the desired frame with which a picture will be
taken.
Selects the shutter sound from Sound1, Sound2 or Sound3.
Selects whether to display the pictures taken in the Burst mode as thumbnails or slides.
Switches the camera view finder screen between the main-LCD and the 2nd-LCD.
to activate the video camera function.
5 and 1 (camera) or 2 (video camera) from the standby screen.
65