Prog Backlight - NEC N400i Mode D'emploi

☛
Press the appropriate key for the required option.
No. Application menu
1 Properties
2 Upgrade
3 Delete
4 Network connection
5 Auto start setting
Depending on the conditions, some options may be displayed in gray and not be available.

Prog backlight

You can set the backlight mode of your phone.
☛
With the standby screen displayed, press
☛
Press 1 to set your phone to follow the normal backlight setting, or press 2 to let the backlight be controlled by the Java™ application.
If you set your phone to follow the normal backlight setting, the current power save settings will be active (see "Power saving" on page 26).
When the software is not running, the backlight operation depends on your phone's backlight settings.
Displays the information of the selected software.
Make an enquiry on whether the selected software has an upgrade. If there is, starts downloading
the data.
Deletes the selected software.
Permits/prohibits the Java™ application software to connect to the network.
☛
Press 1 to enable the software to connect to the network.
☛
Press 2 to disable the software to connect to the network.
Enables or disables the automatic start of a complying Java™ application.
7 and 2 to display the Backlight setting screen.
73