Call Settings - NEC N400i Mode D'emploi

☛
Key in the required value for the whole number and decimal number fields. For the currency field, key in the currency type using a maximum of
three characters.
☛
Press Softkey 1.
To set the unit price, you may be prompted to enter the PIN2 code.
Redial blacklist
If dialled call is not successfully connected (e.g. number busy), the auto redial facility will be offered (see page 11). If you have set auto redial and the
call still fails, the number called will be added to the blacklist.
☛
With the Call options screen displayed, press 7 to access the numbers in the blacklist.

Call settings

From the Calls screen, you can change various call settings: the call diversion, call waiting and holding, auto redial and line identification.
☛
With the standby screen displayed, press
Call diversion
Setting Call diversion
☛
With the Calls screen displayed, press 1. There will be a delay while your phone checks its divert status with your network.
☛
Use the and keys to highlight the type of call you wish to divert.
☛
Use the ▲ and ▼ keys to highlight one of the conditions.
☛
When the phone number field of a divert condition is highlighted, either enter the phone number to divert to, or delete any existing phone number.
☛
If you have made any mistake, use the ▲ and ▼ keys to highlight the appropriate field, and then press Softkey 1 to clear any mistakes. If the
settings are correct, press
There will be a short delay while the network sends the divert status of your phone.
There may be an additional charge for this service depending on your network.
There may be unavailable settings depending on your network.
Call diversion edit options menu
☛
Use the ▲ and ▼ keys to highlight the required edit field, and then press
☛
Press the appropriate key for the required option.
No. Call diversion edit options menu
1 Copy
2 Paste
1 and 6 to display the Calls screen before performing the following procedures.
.
Copies the number in the edit field.
Pastes the previously copied number.
.
10