VTS VOLCANO VR Mini Manuel D'installation, D'utilisation Et D'entretien page 36

VOLCANO VR Mini
VOLCANO VR1
VOLCANO VR2
VOLCANO VR3
VOLCANO VR-D Mini
VOLCANO VR-D
Model: VOLCANO VR Mini EC
1.
2.
3.
4.
5.
6.
7.
8.
0,41kW, 2826m³/h, 145Pa
9.
10.
11.
Disassembly of the machine must be carried out and/or supervised by qualified personnel with appropriate expert
knowledge.
Contact a certified waste disposal organization in your vicinity. Clarify what is expected in terms of the quality of
dismantling the machine and provision of the components.
Dismantle the machine using the general procedures commonly used in mechanical engineering.
WARNING
EN
Machine parts can fall The machine is made up of heavy parts. These parts are liable to fall during dismantling. This can
result in death, serious injury, or material damage.
Follow the safety rules:
12.
To energize the system, apply the measures in reverse order.
Components:
The machines consist for the most part of steel and various proportions of copper, aluminum and plastics and rubber-
neoprene (seat of bearings/hub, gasket). Metals are generally considered to be unlimitedly recyclable.
Sort the components for recycling according to whether they are:
Iron and steel, aluminum, non-ferrous metal, e.g. windings (the winding insulation is incinerated during copper recycling),
insulating materials, cables and wires, electronic waste (capacitor ect.), plastic parts (impeller, junction box, winding
cover ect.), rubber parts (neoprene). The same goes for cloths and cleaning substances which have been used while
working on the machine.
Dispose of the separated components according to local regulations or via a specialist disposal company.
Long failure-free operation depends on keeping the product/device/fan within performance limitations described by
selection software or maintenance manual.
13.
For proper operation, read carefully maintenance manual, with special attention on "installation", "start-up", and
"maintenance" chapters.
14. Inlet ring, fan grid
1) general efficiency (η)
2) measurement category used to determine the energy efficiency
3) efficiency category
4) efficiency coefficient in the point of optimal energy efficiency
5) whether rotational speed regulation was taken into account in the calculation of fan efficiency
6) year of manufacture
7) manufacturer's name or trademark, business register number and place of manufacture
8) product model number
9) rated motor power consumption (kW), flow volume and pressure in the point of energy efficiency
10) rotations per minute in the point of energy efficiency
11) characteristic coefficient
12) essential information to facilitate disassembly, recycling or dispose of the product after the end of its use
13) essential information to minimize the effect on the environment and to guarantee optimum use period,
referring to disassembly, use and technical service of the fan
14) description of additional elements used in determining the energy efficiency of the fan
28.5%
VTS Plant Sp. z o.o., KRS 0000144190, Polska
1-2-2701-0304
1376RPM
1. Disconnect all electrical connections.
3. Make sure that the equipment is at zero voltage.
4. Cover or isolate nearby components that are still live.
VOLCANO VR1/VR2 EC
27.5%
B
Static
21
VSD-No
2016
1-2-2701-0289
0,48kW, 4239m³/h, 124Pa
1370RPM
1,0
2. Prevent reconnection.
36
VOLCANO VR3 EC
28%
1-2-2701-0290
0,68kW, 6006m³/h, 128Pa
1372RPM