Table des Matières
Publicité
Display
Fig 10
Fig 12
Fig 14
22
Short press: Maximum contrast.
Long press: Change the contrast.
Keep pressing the 'Contrast'-key to change the
contrast. Release the button at the desired
setting.
Fig 11
Short press: Use the left/right cursorkeys to select one
of the 5 screen layouts. (see fig.10 to 14)
Use the up/down cursorkeys to view/hide the markers,
grid or crosshair on the screen.
•
•
•
Notes:
Fig 13
· The number of readout-digits depends on the
· At dynamic display mode (see display setup),
· When no markers are displauyed, the cursor
· Markers can also be accessed directly by
HPS10 PersonalScope
ADJUSTING THE CONTRAST
Display
DISPLAY SET-UP
Setup
A grid divides the screen into reference
points. (Fig. 12)
A cross inserts a coordinate system into the
screen. (Fig. 13)
Markers: Moveable markers in order to
measure the signal (Fig. 14).
selected display layout.
the display layout changes for best fitting by
shifting the markers or x-position.
keys are set for changing the time base or input
sensitivity when no keys are pressed during 10
seconds.
pressing the 'Marker 1-2' key.
TM
Publicité
Table des Matières
