Velleman DVM830L Mode D'emploi

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
The DVM830L is a compact pocket-sized multimeter with a 3 1/2 digit LCD for measuring AC and DC voltages, DC
currents, resistance, transistors and diodes. Full overload protection is provided. It is the ideal instrument for
hobbyists, for use in the field, for laboratories and workshops and for domestic applications.
1.1. Warning
Treat this device with the utmost caution as improper use may result in injury or death. In addition to normal safety
precautions for dealing with electrical circuits, the user should also follow the safety precautions suggested in this
manual to the letter. Do not use this device if you are unfamiliar with electrical circuits and testing procedures.
This device is not designed for commercial or industrial use.
1.2. Safety Precautions
This multimeter is designed to ensure the safest operation possible. Nevertheless, safe operation depends on you,
the operator. Follow these simple safety rules:
• Never apply a voltage to the multimeter that exceeds 1000VDC or 700VAC rms between an input jack and
ground.
• Use extreme caution when working with voltages above 60VDC or 30VAC rms.
• Always discharge the filter capacitors in the power supply circuit under test before attaching the test leads.
• Never connect a voltage source to the DVM830L when the device is in the DCA, ACA, resistance continuity
mode.
• Always turn off the power and disconnect the test leads before replacing the battery or fuse.
• Never operate the multimeter unless the battery cover is in place and fully closed.
When carrying out measurements on TV's or switching power circuits, always remember that there may be high
amplitude voltage pulses at test points which may damage the meter.
1.3. Maintenance
Your DVM830L is the result of superior design and craftsmanship. The following suggestions will help you keep your
multimeter in perfect working order:
• Keep the multimeter dry. Wipe it immediately if it gets wet.
• Use and store the multimeter under normal temperatures. Extreme temperatures may shorten the life of the
device or damage the battery.
DVM830L
DVM830L – MINI DIGITAL MULTIMETER
1 VELLEMAN