Setup Menu - Velleman HPS10 Personal Scope Manuel D'utilisation

Setup
1
24
Fig 15
HPS10 PersonalScope
Display

SETUP MENU

Setup
Long press: Shows a setup menu for changing
the operation mode, the default power-off timer
or the display mode.
1.Select the highlighted item with a short
keypress of the setup-key.
2.Keep the setup-key pressed to exit the setup-
menu and to apply the selections.
Note:
· A checkmark indicates the current selection.
· Leaving the mode menu with the 'power off'
key will cancel the selection.
· If no key is pressed during 10 seconds, the
selection will be cancelled, the unit returns to it
previous operating mode and the cursor keys
are set for changing the time base or input
sensitivity.
1. Operating mode
Scope: normal operation mode
Demo: Scope goes into demo mode; several
animated screens are displayed one after the
other.
Version: Version information of the scope
software is displayed
Note:
•
Hiding the version screen can only be done by
long keypressing of the 'Setup'-key and
choosing a different operation mode.
•
Most of the keyboard functions are disabled
TM