Table des Matières
Publicité
Safety & Warnings
Symbols displayed on the unit
Important safety information, see user manual.
Belangrijke veiligheidsinformatie, zie gebruiksaanwijzing.
Information importante relative à la sécurité, voir mode d'emploi
Wichtige Sicherheitsinformationen, siehe Gebrauchsanleitung.
10
Symbolen op het toestel
Symboles sur l'appareil
Symbole auf dem Gerät
!
Ground level
Aardpotentiaal
Potentiel de la terre
Erdpotential
HPS10 PersonalScope
SAFETY and WARNINGS
⇒
The PersonalScope is ideally suited for
measurements of category II installations
with pollution degree 1 and using a
maximum of 600V, in accordance with the
IEC1010-1 norm. The enclosure is UL 94V0
listed
⇒
Consequently, all measurements should be
avoided in case of polluted or very humid
air. One should also refrain from measuring
conductors or installations that use voltages
that exceed 600Vrms above ground level.
CAT
II
indicates
conformity
measurements of domestic installations.
⇒
The maximum input voltage for the
connections of the unit stands at 100Vp
(AC+DC)
⇒
Do
NOT
open
the
enclosure
performing measurements.
⇒
Remove all test leads before opening the
enclosure in order to avoid electrical shock.
⇒
Use a measuring probe with an insulated
connector
when
measuring
exceeding 30V. (PROBE60S).
⇒
Remove the batteries in case of a prolonged
period of inactivity.
Remove all non-rechargeable batteries when
connecting an AC/DC adapter !
TM
for
while
voltages
Publicité
Table des Matières
