Using The Snooze Button; Displaying Temperature; Calling Up The Minimum / Maximum Values - Auriol HG00073A Instructions D'utilisation Et Consignes De Sécurité

RESET button twice to deactivate Alarm
2. Press the SET / RESET button once to
deactivate Alarm 1 and Alarm 2.

Using the snooze button

Press the Z
the alarm signal is sounding to activate
the snooze function.
The alarm signal is silenced and the dis-
plays
The alarm signal sounds again after ap-
prox. 5 minutes.
Press the SELECT button
the snooze function.

Displaying temperature

The LC display shows the indoor temperature
and the outdoor temperature
6
Press and hold down the SELECT button
for approx. 3 seconds. The °C dis-
19
play flashes.
Press the SET / RESET button
between the °C (Celsius) and °F (Fahr-
enheit) temperature scales.
Press the SELECT button to confirm your
settings.
Calling up the minimum /
maximum values
The temperature station stores the maximum
and minimum values of the outdoor sensor
and of the temperature station itself.
Z
/ REGISTER button
and Z
or
Z
flash.
to deactivate
19
2
20
while
18
.
to switch
GB/IE 21