1700 Mm 410 Mm 0-5 Mm; M/Min; 7.0 Kva - Metabo HC 410 Manuel D'utilisation

Contents
1 Specifications
2 User Responsibility
3 Standard Delivery
4 Optional Accessories
5 Scope of Application
6 Transportation
7 Installation/Initial Operation
8 Safety
9 Workpiece Dimensions
1 Specifications
Stock-no.:
Planing bed overall length:
Max. planing width:
Depth of cut, planing:
Fence tilt:
Length thicknessing bed:
Thicknesser capacity - width:
Thicknesser capacity - height:
Max. depth of cut, thicknessing:
Thicknesser feed rate:
Cutterblock speed:
No. of planer blades:
Motor capacity P
Voltage, motor:
Voltage, control circuit:
Input capacity:
Mains fuse:
Weight:
Floor space required, approx.:
Working height, planing:
Workplace related noise emission values L
Required vaccuum at dust collection port: 900 Pa.
Planing:
Thicknessing:
2 User Responsibility
This machine will perform in conformity with the description contained in the instructions provided. This machine
must be checked periodically. Defective equipment (including power cable) should not be used. Parts that are
broken, missing, plainly worn, distorted or contaminated, should be replaced immediately. Should such repair
or replacement become necessary, it is recommended that such repairs are carried out by qualified persons
approved by metabo or its authorized representatives.
This machine or any of its parts should not be altered or changed from standard specifications. The user of this
machine shall have the sole responsibility for any malfunction which results from improper use or unauthorized
modification from standard specifications, faulty maintenance, damage or improper repair by anyone other than
qualified persons approved by metabo or its authorized representatives.
metabo reserves the right to change specifications and design without prior notice and without incurring
obligation of any kind. Equipment referred to as available or optional may be at extra cost.
3 Standard Delivery
- Cutter guard with 410 mm cover
- 3 reversible planing blades, installed in
cutterblock
- 4 adjustable feet, installed
- Dust collection chute, installed
:
1
10 Dangerous Operations
11 Push Blocks
12 Controls
13 Operation
14 Daily Safety Checks
15 Replacing/Setting the Planer Blades
16 Care and Maintenance
HC 410 D
011 304 1013
1700 mm
410 mm
0-5 mm
90°-45°
670 mm
405 mm
230 mm
5 mm

7 m/min

5500 rpm
33
5.5 kW
3~ 400 VAC 50 Hz
230 VAC

7.0 kVA

3x16 A time-lag
275 kg
1740 x 800 mm
900 mm
according to DIN 45635, part 1651, idling:
P
84,0 dB(A)
87,3 dB(A)
- With 230 1-ph/400 V 16 A 3-ph plug
- Canting fence, disassembled
- Tool set
- Instructions
- Lifting eyes
ENG