Technical Specifications - Enraf Nonius Endolaser 422 Mode D'emploi

WARNING:
Do not use the machine near HF SURGERY EQUIPMENT and rooms with an RF shielding of an EM
SYSTEM for magnetic resonance imaging, in which the intensity of EM DISORDERS is high.
In order to avoid any eventual problems which may occur in relation to interference, it is recommended
that all machines used for therapy be operated at sufficient distance from critical apparatus used for
monitoring the bodies vital functions and be caution when applying therapy to patients with cardiac
stimulators.

8 Technical Specifications

Endolaser 442
Mains voltage:
Max. Power absorption
Double fuse protection:
Backlite LCD Display, to visualise and control operating parameters:
Interlock socket/Safety key (contacts normally closed)
Programmable treatment time::
Programmable pulse frequency
Pulse duration
Pulsed mode
Classification of second laser according to EN 60825-1
IR radiation sensor for the external laser probe.
Class of device according to 93/42/CEE
Electrical insulation / applied parts class according to the UNI EN 60601-1
standard
Degree of protection by the liquid access according to the UNI EN 60601-1
standard
DO (Optical Density) with λ=808nm
DO (Optical Density) with λ=905nm
Output independent channels
Stored protocols
Storable protocols on the smart-card
Plastic table container - external dimensions (L x A x P)
Weight of the machine body:
Use conditions
Stocking/transport conditions
230Vac
115Vac
Room temperature
Relative humidity
Atmospheric pressure
Room temperature
Relative humidity
Atmospheric pressure
230 Vac 50-60Hz ±10%
115 Vac 50-60Hz ±10%
15 VA
500 mA-T 5 x 20 mm
500 mA-T 5 x 20 mm
graphic 240 x 128 pixel
6 contact DIN socket
up to 60 min
(100 - 10.000) Hz
100 nsec
(10 – 100 ) %
3B
On the anterior pannel
II B
I / BF
IPX0
2,8
0,9
2
82
50
29x28x11, 5 cm
3,2 kg
(+10 : +40) °C
(10 : 80) % without
condensation
(500 : 1060) hPa
(-40 : +70) °C
(10 : 90) % without
condensation
(500 : 1060) hPa
EN
19