How To Use The Remote Control - Num'axes CANICOM 200 Guide D'utilisation

IMPORTANT: before beginning the coding (first use of the receiver or re-coding), make sure no
other person is using his CANICOM 200 or other products from the NUM' AXES range close by:
your receiver collar could accidentally record the code of his remote control. If that occurs, re-
code the remote control with the receiver collar.
CODING PROCEDURE FOR THE 1ST USE
1. Activate the remote control: press for 1 second the On/Off red button ( ) located on the side of the
remote control.
2. Activate the receiver collar: approach the red indicator located on the remote control until coming in
contact on red indicator located on the receiver collar for 1 second.
3. Move the remote control away from the receiver collar.
4. Press the button
RE-CODING PROCEDURE (for all codings other than the 1st)
1. Activate the remote control: press for 1 second the On/Off red button ( ) located on the side of the
remote control.
2. Receiver collar in position « deactivate » (indicator off): approach the red indicator located on the
remote control until coming in contact on red indicator located on the receiver collar for 6 seconds.
The indicator lights in fixed green, then flashes in red.
3. Move the remote control away from the receiver collar.
4. Press the button
N Reprogram a receiver collar
Receiver can be re-coded indefinitely, either with the same remote control, or with a new CANICOM
remote control.
Ref. § Re-coding procedure.

How to use the remote control

The remote control CANICOM 200 is designed to operate with 1 receiver collar.
O
button: beeper
If you press the « Beeper » button
this function: the beeper will continue to sound as long as you press the button.
A « transmission » symbol will appear on the LCD screen of the remote control; the indicator light on the
collar goes from flashing green to permanent green as long as you press the button.
of the remote control. Receiver collar is then synchronized with your remote control.
of the remote control. Receiver is then synchronized with your remote control.
the receiver collar will emit sound signals. There is no time limit for
Gb - 24
( (
( (