How To Use The Remote Control - Num'axes CANICOM 200 Guide D'utilisation

IMPORTANT: before beginning the coding (first use of the receiver or re-coding), make sure no
other person is using his CANICOM 200 or other products from the NUM'AXES range close by: your
receiver collar could accidentally record the code of his remote control. If that occurs, re-code
the remote control with the receiver collar.
CODING PROCEDURE FOR THE 1ST USE
1. Activate the remote control: press for 1 second the On/Off red button ( ) located on the side of the
remote control.
2. Activate the receiver collar: approach the red indicator located on the remote control until coming
in contact on red indicator located on the receiver collar, hold for 1 second.
3. Move the remote control away from the receiver collar.
4. Press the button of the remote control. A beep sound is emitted, the collar is then synchronized with
your remote control.
RE-CODING PROCEDURE (for all codings other than the 1st)
1. Activate the remote control: press for 1 second the On/Off red button ( ) located on the side of the
remote control.
2. Receiver collar in position « deactivate » (indicator off): approach the red indicator located on the
remote control until coming in contact on red indicator located on the receiver collar, hold for
6 seconds. The indicator lights in fixed green, then flashes in red.
3. Move the remote control away from the receiver collar.
4. Press the button
with your remote control.
Reprogram a receiver collar
Collar can be re-coded indefinitely, either with the same remote control, or with a new CANICOM
remote control.
Ref. § Re-coding procedure.

How to use the remote control

The CANICOM 200 remote control is designed to operate with 1 receiver collar.
button: beeper
If you press the « Beeper » button
for this function: the beeper will continue to sound for as long as the button is pressed.
A « transmission » symbol will appear on the LCD screen of the remote control; the indicator light on the
collar goes from flashing green to permanent green for as long as the button is pressed.
of the remote control. A beep sound is emitted, the collar is then synchronized
the receiver collar will emit sound signals. There is no time limit
Gb - 24
( (
( (