Kollmorgen SERVOSTAR 300 Manuel D'instructions page 62

S300 Safety Guide | 2 English
2.6.3.8 Units/Mechanical
The user units for all input fields in the setup software can be preselected here.
Position, Velocity, Acceleration
Select usable units for your application referring to the moved load. The relationship between
motor shaft revolution (pole pait pitch with linear motors) and motion distance of the load is
specified here. Gear ratio can be calculated here as well. Detailed information can be found in
the Online Help. Use the tool based on sample applications for calculating the resolution
value:
Calculate PGEARI/PGEARO for..." button
If a gearhead is flange-mounted on the motor, you must also enter the gearhead data (either
the number of teeth or the ratio of the revolutions).
Then click the "Calculate conversion factors and return" button. Click NEXT.
62 Kollmorgen | June 2015
If your application does not
correspond to any of the lis-
ted examples, enter the
required parameters directly
in the fields on the "Units"
screen.
First, select the application
that corresponds to your own.
Next, set the position unit.
Select the position unit that
provides you with the
required accuracy for your
application.
Set the mechanical data for
you application now.