Safety Of Others - DeWalt XR DCM563P1-QW Traduction De La Notice D'instructions Originale

• Keep all parts of the body away from the
cutter blade. Do not remove cut material
or hold material to be cut when blades are
moving. Make sure the switch is off when
clearing jammed material. A moment of
inattention while operating the tool can result in
serious personal injury.
• Carry the hedge trimmer by the handle
with the cutter blade stopped. When
transporting or storing the hedge trimmer
always fit the cutting device cover. Proper
handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
• Hold the power tool by insulated gripping
surfaces only, because the cutter blade
may contact hidden wiring. Cutter blades
contacting a "live" wire may make exposed
metal parts of the power tool "live" and could
give the operator an electric shock.
• The intended use is described in this instruction
manual. The use of any accessory or
attachment or performance of any operation
with this tool other than those recom- mended
in this instruction manual can present a risk of
personal injury and/or damage to property.
• Do not carry the tool with your hands on the
front handle, switch or the trigger switch unless
the battery has been removed.
• If you have not used a hedge trimmer before,
preferably seek practical instruction by an
experienced user in addition to studying this manual.
• Never touch the blades while the tool is running.
• Never attempt to force the blades to come to a
standstill.
• Do not put the tool down until the blades have
come to a complete standstill.
• Regularly check the blades for damage and wear.
Do not use the tool when the blades are damaged.
• Take care to avoid hard objects (e.g. metal wire,
railings) when trimming. Should you accidentally
hit any such object, immediately switch the tool
off and check for any damage.
• Should the tool start to vibrate abnormally,
immediately switch it off and remove the battery
then check for any damage.
• If the tool stalls, immediately switch it off.
Remove the battery before attempting to
remove any obstructions.
• After use, place the blade sheath supplied over
the blades. Store the tool, making sure that the
blade is not exposed.
• Always ensure that all guards are fitted when
using the tool. Never attempt to use an
incomplete tool or a tool with unauthorised
modifications.
• Never allow children to use the tool.
• Be aware of falling debris when cutting the
higher sides of a hedge.
• Always hold the tool with both hands and by
the handles provided.

SAFETY OF OTHERS

• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
Residual risks.
Additional residual risks may arise when using the
tool which may not be included in the enclosed
safety warnings. These risks can arise from misuse,
prolonged use etc. Even with the application of the
relevant safety regulations and the implementation
of safety devices, certain residual risks can not be
avoided. These include:
• Injuries caused by touching any rotating/moving
parts.
• Injuries caused when changing any parts,
blades or accessories.
• Injuries caused by prolonged use of a tool.
When using any tool for prolonged periods
ensure you take regular breaks.
• Impairment of hearing.
• Health hazards caused by breathing dust
developed whenusing your tool (example:- working
with wood, especially oak, beech and MDF.)
Vibration
The declared vibration emission values stated
in the Technical Data and the Declaration of
Conformity have been measured in accordance
with a standard test method provided by
EN60745and may be used for comparing one tool
with another. The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission value
during actual use of the power tool can
differ from the declared value depending
on the ways in which the tool is used.
The vibration level may increase above
the level stated
english
31