Adjusting The Picture Using Real Color Processing - Sony VPL-VW100 Mode D'emploi

Adjusting the Picture Using Real Color
Processing
The Real Color Processing (RCP) feature allows you to adjust the color and
hue of each target of the projected picture you specify independently. You can
thus obtain a picture more suitable to your taste.
Tip
Freeze the scene of the video source when you are adjusting the picture using Real Color
Processing.
1
Press RCP on the remote control.
2
Press
press
The RCP (Real Color Processing) window appears.
3
Select the target color you want to adjust.
Repeat steps 1 and 2 described below to specify the target color.
1 Press
color you want to adjust among "Red," "Yellow," "Green," "Cyan,"
"Blue" and "Magenta."
Only the portions that correspond to the specified color will be colored
and the other portions will be displayed in black and white. The
reference palette in the RCP window also shows the adjustable colors.
Decide the target while you are watching the projected picture, and
watching the reference palette as a guide.
LIGHT
DYNAMIC
USER 1
LENS
WIDE MODE
BRIGHT
or to select "User 1," "User 2" or "User 3," then
M m
, .
M or m to select "Color Select," then press

Adjusting the Picture Using Real Color Processing

INPUT
STANDARD CINEMA
PICTURE MODE
USER 2 USER 3
2, 3, 4
ENTER
ADJ PIC MENU
RCP RESET
REAL COLOR PROCESSING 1
CONTRAST
< or , to select the
39
GB