Declaration Of Conformity; Specified Conditions Of Use; General Safety Information; Special Safety Instructions - Metabo NMP 18 LTX BL M10 Notice Originale

Original instructions

1. Declaration of Conformity

We, being solely responsible: Hereby declare that
these rivet nut guns, identified by type and serial
number *1), meet all relevant requirements of
directives *2) and standards *3). Technical
documents for *4) - see page 3.
For UK only:
We as manufacturer and authorized person to
compile the technical file, see *4) on page 3,
hereby declare under sole responsibility that these
rivet nut guns, identified by type and serial number
*1) on page 3 of the Original Instructions, fulfil all
relevant provisions of following UK Regulations S.I.
2016/1091, S.I. 2008/1597, S.I. 2012/3032 and
Designated Standards *3) on page 3.

2. Specified Conditions of Use

The rivet nut gun may only be used for installing
blind rivet nuts and blind rivet studs as described in
these operating instructions.
The machine may only be operated in rooms where
the air temperature is between 0-55 °C and the
relative air humidity is at 20-80/100 % RH. It must be
ensured that the hall illumination on the operational
side is sufficient.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.

3. General Safety Information

For your own protection and for the
protection of your power tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Read the operating
instructions to reduce the risk of injury.
WARNING – Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Always include these documents when passing on
your power tool.

4. Special safety instructions

Wear safety glasses.
Personal protective equipment such as
protective clothing, a safety helmet, non-slip
shoes, and fall protection is recommended.
Wear protective gloves.
Wear ear protectors. Exposure to noise can cause
hearing loss.
Attention: The device is not suited for operation in
an ATEX zone.
The following safety regulations must be observed
to protect against electric shock, injury and fire:
- Do not overload the riveting tool. Work in the
stated power range.
- Never use the riveting tool in a moist / wet
environment or near flammable liquids and gases.
Danger of explosion!
- Ensure that the battery pack is firmly pushed into
the handle.
- Always remove the battery pack when the riveting
tool is not in use and during maintenance work.
- The riveting tool may not be used as an impact
tool.
- The battery pack may only be charged between
0°C and +55°C.
- The riveting tool may only be stored in a dry,
closed room and must be stored in an area not
accessible to children.
- The ventilation slots for the motor may not be
closed; do not insert objects into slots.
- Secure the riveting tool against falling during
storage.
- Only use original spare parts for repairs.
- Repairs may only be carried out by a qualified
technician. In case of doubt send the riveting tool
to the manufacturer.
CAUTION Do not stare at operating lamp.
Remove the battery pack from the device
before making any adjustments, changing tools,
maintaining or cleaning.
Protect battery packs from water and
moisture!
Do not expose battery packs to fire!
Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch or short circuit battery pack contacts!
A slightly acidic, flammable fluid may leak
from defective Li-Ion battery packs!
If battery fluid leaks out and comes into
contact with your skin, rinse immediately
with plenty of water. If battery fluid leaks out
and comes into contact with your eyes, wash them
with clean water and seek medical attention
immediately!
If the device is defective, remove the battery pack
from the device.
Transport of Li-Ion battery packs:
The shipping of Li-Ion battery packs is subject to
laws related to the carriage of hazardous goods (UN
3480 and UN 3481). Inform yourself of the currently
valid specifications when shipping Li-Ion battery
ENGLISH en
9