en
ENGLISH
Original instructions
1. Declaration of Conformity
Under our sole responsibility, we hereby declare
that these compressed air band files, identified by
type and serial number *1), meet all relevant
requirements of directives *2) and standards *3).
Technical documents for *4) - see Page 3.
2. Specified Use
The band file is used for dry sanding, deburring and
polishing metals, wood, materials similar to wood,
plastics and construction materials in professional
applications.
The tool must only ever be operated with a com-
pressed air supply. The maximum supply pressure
specified on the air tool must never be exceeded.
The air tool must not be operated using explosive,
inflammable or hazardous gases. It must not be
used as a lever, crushing tool or striking tool.
Any other use does not comply with the intended
purpose. Unspecified use, modification of the air
tool or use of parts that have not been tested and
approved by the manufacturer can cause unfore-
seeable damage.
The user bears sole responsibility for any damage
caused by improper use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must be
observed.
3. General Safety Instructions
For your own protection and for the
protection of your air tool, pay attention to
all parts of the text that are marked with
this symbol!
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety warn-
ings and instructions may result in electric shock,
fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Pass on your air tool only together with these docu-
ments.
- The user or user's employer must evaluate the
specific risks associated with each application of
the tool.
- The safety instructions must be read and under-
stood before installing, operating, repairing or
maintaining the tool, and also before replacing any
accessory parts or carrying out any work in the
vicinity of the air tool. Failure to read and follow the
instructions may lead to serious injury.
- Only qualified, trained operators are authorised to
install, adjust or use the air tool.
10
- The air tool must not be modified. Any modifica-
tions may reduce the efficiency of the safety
measures and increase risks for the operator.
- Never use air tools that have been damaged. Look
after your air tools carefully. Regularly check that
all moving parts are functioning correctly and do
not jam. Also ensure that no parts are broken or
damaged to an extent that they affect the opera-
tion of the air tool. Check that all signs and labels
are legible and intelligible. Have damaged parts
repaired or replaced before using the device.
Many accidents are caused by poorly maintained
air tools.
4. Special Safety Instructions
4.1
Risks associated with ejected parts
Disconnect the air tool from the compressed air
supply before replacing the mounted tool or acces-
sory parts, and also before carrying out repairs or
settings.
If either the workpiece, accessory parts or the air
tool breaks, parts may be ejected at high speed.
While operating, maintaining or repairing the air
tool, or replacing accessory parts, you must always
wear impact-resistant safety goggles. The degree
of protection required for each individual task must
be evaluated separately in each case.
Wear a safety helmet if carrying out work above
your head. Also ensure that no other people are
placed at risk.
Ensure that the workpiece is securely attached.
4.2
Risks associated with items catching/
getting entwined
Wear suitable clothing. Do not wear loose clothing
or jewellery. Keep hair, clothing and gloves at a safe
distance from the air tool and moving parts. Loose
clothing, jewellery or long hair could catch in moving
parts. There is a risk of injury in this case.
4.3
Risks during operation
When using the air tool, the operator's hands may
be exposed to potential risk of cuts, abrasions and
heat damage. To protect your hands, wear suitable
gloves.
The operator and maintenance staff must be physi-
cally capable of handling the size, weight and power
output of the air tool.
Make sure you hold the air tool correctly: since you
must be prepared to counter any standard or unex-
pected movements, keep both hands ready.
Ensure you stand in a safe position and keep your
balance at all times.
Avoid accidental operation. If the air supply is inter-
rupted, switch off the air tool using the On/Off
switch.
Only use lubricants that have been recommended
by the manufacturer.