Sony MSAC-PC3 Mode D'emploi page 27

A
• Never remove the "Memory Stick" while the access lamp is on (while
data is being read/written).
• Data may be corrupted in the following cases.
– If the "Memory Stick" is removed or the power to this unit is turned
off while the access lamp is on (while data is being read/written)
– When used in a location subject to static electricity or electrical noise
• Always backup important data. Sony does not accept liability for it, even
if data is lost.
• We cannot accept responsibility in the event that data is lost or damaged
and the unit is damaged, while using this unit.
• Data copyright protected by "MagicGate" can only be used with a
"MagicGate Memory Stick." (This unit is not compatible with
"MagicGate".)
• Do not touch the connector section A with fingers or metallic objects.
• Do not affix any label other than those specially provided on the label
space B.
• When affixing labels, affix these at the designated positions. Labels
should not protrude from the edges of the "Memory Stick."
• When transporting or storing a "Memory Stick," place it in the supplied
storage case.
• Do not bend, drop or subject the "Memory Stick" to strong impacts.
• Do not attempt to disassemble or modify the "Memory Stick."
• Do not wet with water.
• Avoid use and storage in the following locations.
– In a car where the temperature may become very high or in other hot
locations
– Location subject to direct sunlight
– Location with high humidity or where corrosive substances are
present.
how to affix
labels
B
27-US