Sony MSAC-PC3 Mode D'emploi page 14

Confirming that connections are completed
(Continued)
6
Search for the drive assigned to the unit in [GENERIC IDE DISK
TYPE XX] (XX is a 2-digit number or a "=" sign and a single-
digit number). Search for the drive in question as follows.
1 Select the first [GENERIC IDE DISK TYPE XX] (in this example,
[GENERIC IDE DISK TYPE 00]), and click [Properties].
2 After opening the "Properties" window, click the [Settings] tab.
3 Check the text box for the "Current drive letter assignment", if the
drive letter assigned to the unit is the same, then the selected
device drive is the drive assigned to the unit. If the drive letters are
different, click [Cancel], close the properties screen, select the next
[GENERIC IDE DISK TYPE XX] (in this example, [GENERIC IDE
DISK TYPE 40]), and check it by following the same steps.
4 Keep repeating these steps until you find the drive assigned to the
unit.
14-US