PIONEER DJ DDJ-800 Mode D'emploi page 12

3 Connect your PC/Mac to the unit via a USB cable.
USB cable
(included)
4 Turn on your PC/Mac.
5 Connect the AC adapter.
AC adapter
(included)
Power cord
included
To power outlet
6 Press the [u] switch on the rear panel of this unit to
turn this unit on.
This unit turns on.
! For Windows
The [Installing device driver software] message may appear
when this unit is first connected to the PC or when it is con-
nected to a different USB port on the PC. Wait a while until the
[Your devices are ready for use] message appears.
7 Turn on the devices connected to the output
terminals (powered speakers, power amplifier,
components, etc.).
! If a microphone, DJ player or other external device is connected
to the input terminals, turn on the connected device.
12 12
En