Contact Grill" Position - SilverCrest SKGE 2000 B2 Mode D'emploi

Masquer les pouces Voir aussi pour SKGE 2000 B2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 82
NOTE
The green control lamp "Ready"
control
the desired position, the green control lamp "Ready"
temperature has been reached.
The green control lamp "Ready"
indicates that the temperature has fallen below the set temperature and the
appliance is heating up again.
NOTE
You can use this grill in 3 different ways:

"Contact grill" position

1) Open the appliance lid and place the food to be grilled on the lower
hotplate
2) Close the appliance lid using the handle.
3) Due to its movable mount, the upper hotplate
lower hotplate
optimal grilling result.
4) Check the browning of the food after a while. To do this, open the appliance
lid using the handle.
NOTE
Start with short grilling times and increase them until you identify the correct
duration.
5) When you are satisfied with the level of browning, remove the grilled food.
CAUTION
Damage to the appliance!
Do not use pointed or sharp objects to remove the grilled food. These could
damage the surfaces of the hotplates
6) Turn the heat level control
power socket.
SKGE 2000 B2
is set to MIN. As soon as you set the heat level control
fully open so that both hotplates
with the movable upper hotplate
instance, meat is grilled from both sides.
with the fixed upper hotplate
instance, baguettes can be gratinated.
.
even if the food to be grilled is bulky. This guarantees an
also comes on when the heat level
may switch off again in the interim. This
can be used as a table grill.
as a contact grill so that, for
as a panini grill so that, for
always lies parallel to the
!
to MIN and remove the plug from the mains
to
goes out until the
11
GB
IE

Publicité

Table des Matières
loading

Table des Matières