Use; Installation; Requirements For A Measurement - Dräger Interlock 5000 Notice D'utilisation

The components are approved in accordance with the following
directives and standards:
Component
Control unit
Camera
Handset
GPRS module
Directive/
Coding
Standard
A 2014/30/EU
(Interlock 5000/7000)
2006/28/EC
2009/19/EC
EN 50436-1, -2
NHTSA / BAIID
B 2014/30/EU
(Interlock 5000/7000)
C 1999/5/EC
(Interlock 7000)
FCC Part 15
IC RSS-210
NOTICE
i
i
Applied standards are listed with their date of issue in the
Declaration of Conformity.
Dräger Interlock 5000 / 7000
Coding
A
A
A, C
A, C
Reference
EMC Directive
EMC Directive,
motor vehicles
RFI suppression (EMC),
motor vehicles
Alcohol Interlock, Europe
Alcohol Interlock, USA
EMC Directive
Radio, Europe
Radio, USA
Radio, Canada
The ABE (Allgemeine Betriebserlaubnis—General Operating License)
has the KBA code 91592.
3

Use

3.1

Installation

WARNING
!
Alterations and additions to the device may cause danger.
Such alterations and additions invalidate the certificate of
installation contained in this instructions for use booklet.
The installation may only be carried out by an authorized Dräger
Interlock service centre or a professional auto repair shop according to
the respective instructions for installation.
When choosing the installation site, the existing regulations for the
interior of vehicles have to be observed.
3.2

Requirements for a measurement

WARNING
!
No alcohol and solvent vapours (disinfectants, window
cleaning fluids) in the ambient air.
Do not store in ambient air containing alcohol and solvent
vapours (disinfectants, window cleaning fluids).
Do not allow a high alcohol concentration to reach the sensor, e. g.

from drinking alcohol, eating alcohol containing foods or rinsing
the mouth with alcoholic mouthwash just before measurement.
Use
7