Storing Machine; Recommended Stock Items; Trouble Shooting - Nobles SPEEDSHINE Série Manuel Opérateur

STORING MACHINE

1. Remove brush/pad driver from machine and neatly
coil cord around cord hook and handle.
2. Store machine in a dry area in the upright position.
WARNING: Electrical Shock Hazard.
Do Not Use Outdoors. Do Not Expose to Rain.
Store Indoors.

TROUBLE SHOOTING

PROBLEM CAUSE
Machine does not Faulty power cord.
operate.
Tripped circuit breaker.
Tripped building circuit breaker.
Faulty machine wiring.
Faulty On/Off handle switch.
Faulty motor.
Capacitor burned out (Single speed models). Contact Service Center.
Rectifier burned out (Dual speed models).
Machine operates Soiled Pad.
with a wobble or jerky
Improper pad/brush for application.
motion.
Pad driver/brush not installed correctly.
Pad/brush unevenly worn.
Pad not properly centered on pad driver.
Machine circuit Heavily soiled pad/brush.
breaker trips
Improper pad/brush for application.
continuously.
Defective circuit breaker.
Worn carbon brushes in motor.
Speedshine 1700HD/1700DS/2000HD/2000DS (11- -06)
Home Find... Go To..

RECOMMENDED STOCK ITEMS

Refer to the Parts List for recommended stock items.
Stock Items are clearly identified with a bullet
preceding the parts description. See example below:
SOLUTION
Contact Service Center.
Reset circuit breaker on machine.
Reset circuit breaker in building.
Contact Service Center.
Contact Service Center.
Contact Service Center.
Contact Service Center.
Replace Pad.
Change to proper pad/brush.
Remove and reinstall pad driver/brush.
Replace pad/brush.
Remove and reinstall pad.
Clean or replace pad/brush.
Change to proper pad/brush.
Contact Service Center.
Contact Service Center.
OPERATION
9