Configuration And Firmware Update Via Can And Z21; Maintenance Tool - Roco Z21 dual BOOSTER Manuel D'utilisation

Z21 Booster
®_
Blue on: Normal mode
Now press the STOP button and hold it:
Blue flashes: STOP (track voltage deactivated)
Green flashes: Configuration mode (1st track output)
White flashes: Configuration mode (2nd track output, dual booster)
Red flashes: Restart of the booster firmware (warm start)
Violet flashes: Reset to factory default settings
INFO: "white" = red + green + blue simultaneously;
Configuring:
The Z21 -Boosters can be configured in one of three ways:
®
1. via CAN with the Z21
2. via POM write commands in booster configuration mode
3. via the STOP button in booster configuration mode

Configuration and firmware update via CAN and Z21

If the Z21 -Boosters is connected with the Z21
®
nance Tool (from V1.14, take the chance and also update the Z21
in the "CAN".
40
40
8010806920 neu.indd 40
"violet" = red + blue simultaneously.

Maintenance Tool

®
, via CAN, it appears automatically in the Z21
®
Maintenance Tool
®
firmware), possibly under each other
®
Mainte-
®
25.10.2018 13:04:39