Adjusting The Recording Level (Peak Search); Additional Information; Notes On Cds - Sony CDP-XE500 Mode D'emploi

Recording From CDs
Adjusting the Recording Level
(Peak Search) (CDP-XE500
only)
The player locates the highest level among the tracks to
be recorded to let you adjust the recording level before
you start recording.
PEAK SEARCH
1
Before you start playing, press PEAK SEARCH.
"PEAK" flashes in the display and the player
repeats the portion of the highest level.
2
Adjust the recording level on the deck.
3
Press p on the player to stop Peak Search.
"PEAK" disappears from the display.
Note
The portion with the highest level may differ every time you
try the adjustment on the same disc. The difference is,
however, so slight that you won't find any problem in
adjusting the recording level precisely.
14
EN

Additional Information

Notes on CDs

On handling CDs
• To keep the disc clean, handle the disc by its edge. Do not
touch the surface.
• Do not stick paper or tape on the disc.
• Do not expose the disc to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in direct
p
sunlight as there can be considerable rise in temperature
inside the car.
• Do not use any commercially available stabilizer. If you do,
the disc and the player may be damaged.
• After playing, store the disc in its case.
On cleaning
• Before playing, clean the disc with a cleaning cloth. Wipe
the disc from the center out.
• Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.
Not this way