Symbols - Ryobi RY3818 Manuel D'utilisation

The following signal words and meanings are intended to explain the levels of risk associated with
this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL
Safety Alert
Read The Operator's
Manual
Wear Eye, Hearing, and
Head Protection
Keep Tool Away from
Electrical Lines/Keep
Bystanders Away
SAFE-T-TIP Nose Guard
Operate With Two Hands
One Handed
Bar Nose Contact

SYMBOLS

MEANING
Indicates an hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation, that, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates information considered
important, but not related to a potential injury (e.g. messages re-
lating to property damage).
NAME
Precautions that involve your safety.
To reduce the risk of injury, user must read and
understand operator's manual before using this
product.
Wear eye protection with side shields marked to
comply with ANSI Z87.1 as well as hearing and head
protection when operating this equipment.
DANGER! Risk of electrocution! Keep tool 50 feet away
from electrical lines. Keep all bystanders at least 50
ft. away or twice the height of the largest trees in the
felling area when felling.
The SAFE-T-TIP nose guard on the guide bar helps
prevent kickback.
Hold and operate the saw properly with both hands.
Do not operate the saw using only one hand.
Avoid bar nose contact. Tip contact may cause the
guide bar to move suddenly upward and backward,
which may cause serious injury.
Page 6 — English
DESIGNATION/EXPLANATION