Ice Maker; Before Using The Appliance For The First Time; Switching Ice Cube Production On Or Off; Defrosting - Bosch B36CL SN Série Notice De Montage Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

;Ice maker

The ice maker produces ice cubes.
The ice maker will only work when the
Note:
appliance is connected to a drinking water supply
and a filter is installed.
Before using the appliance for the first
time
As soon as the appliance is switched on and the
freezer compartment reaches the set
temperature, the first batch of ice cubes will be
ready in approximately 4 hours.
For hygiene reasons, ice cubes produced within
the first 24 hours should be discarded.

Switching ice cube production on or off

9
WARNING
RISK OF INJURY!
Never reach under or into the ice maker.
9
CAUTION
Damage to the appliance!
Never store bottles or food in the ice cube bin
when ice cube production is switched on. This
may block and damage the ice maker.
Open the freezer drawer up to the stop.
1.
Move up the ice maker flap to open.
2.
Press " button for the ice maker.
3.
If ice cube production is switched on, the button
lights up.
Close the ice maker flap and freezer
4.
compartment drawer.
Notes
Once ready, ice cubes are automatically
discharged into the ice cube bin.
Ice cube production stops automatically when the
maximum filling level of the ice cube bin is
reached.
You can accelerate ice cube production by
setting a colder freezer compartment temperature
or switching on super freezing. This will slightly
increase energy consumption.
If ice cubes taste stale, discard the rest and the
cubes produced over the next 24 hours. If ice
cubes still taste stale, change the water filter.

=Defrosting

T he fully automatic NoFrost system ensures that the
D e f r o s t i n g
appliance remains frost-free. Defrosting is not
required.
Defrosting en-us
27

Publicité

Table des Matières
loading

Table des Matières