Imer Group MECA 25 D Manuel D'utilisation page 41

THE PUMP IS MEETING THE FOLLOWING PROBLEMS :
•
No pressure rise;
•
Intermittent pressure;
1) The pump sucks up air
2) Input water is blocked
3) The suction hose is pinched
4) Leak on suction or discharge hose
NOTE
If the pump still cannot start, please contact the IMER France dealer or the nearest After-Sales
Service to get information and to be instructed with measures to take.
•
Pressure jolt;
•
Low water flow;
1) Control the delivery hose. Make sure it is not
porous
2) Clean the input
3) Eliminate the pinching
4) Repair the leak
F
EN
E
R
41