Accessories; Standard Accessories - Hitachi G 10SR3 Instructions De Sécurité Et Mode D'emploi

MODIFICATIONS:
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest
technological advancements.
Accordingly, some parts (i.e. code numbers and/
or design) may be changed without prior notice.
WARNING:
Never use any accessories other than those mentioned below.
The use of any accessories other than those mentionded below or attachments not intended for use such as
cup wheel, cut-off wheel or saw blade is dangerous and may cause personal injury or property damage.
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1) For grinder supplied with Carrying Case
Wrench .................................................................. 1
(Code No. 936522 ............................... G10SR3)
(Code No. 938332Z ............................. G12SR3)
Side Handle (Code No. 318312) ........................... 1
Depressed center wheel ....................................... 1
4" (100mm) external dia. × 1/4" (6mm) thickness ×
5/8" (16mm) hole dia.
(Code No. 701040 or 326204) ............. G10SR3
4-1/2" (115mm) external dia. × 1/4" (6mm)
thickness × 7/8" (22mm) hole dia.
(Code No. 701045 or 326203) ............. G12SR3
(2) For grinder supplied without Carrying Case
Wrench .................................................................. 1
(Code No. 936522 ............................... G10SR3)
(Code No. 938332Z ............................. G12SR3)
Side Handle (Code No. 318312) ........................... 1
Depressed center wheel ....................................... 1
4" (100mm) external dia. × 1/4" (6mm) thickness ×
5/8" (16mm) hole dia.
(Code No. 701040 or 326204) ............. G10SR3
4-1/2" (115mm) external dia. × 1/4" (6mm)
thickness × 7/8" (22mm) hole dia.
(Code No. 701045 or 326203) ............. G12SR3
NOTE:
Specifications are subject to change without any
obligation on the part of the HITACHI.

ACCESSORIES

English
11