Accessories; Standard Accessories - Hitachi G 12VA Instructions De Sécurité Et Mode D'emploi

English
6. Service and repairs
All quality power tools will eventually require
servicing or replacement of parts because of wear
from normal use. To assure that only authorized
replacement parts will be used, all service and
repairs must be performed by a HITACHI
AUTHORIZED SERVICE CENTER, ONLY.
7. Service parts list
CAUTION:
●
Repair, modification and inspection of Hitachi
Power Tools must be carried out by a Hitachi
Authorized Service Center.
This Parts List will be helpful if presented with the
tool to the Hitachi Authorized Service Center when
requesting repair or other maintenance.
In the operation and maintenance of power tools,
the safety regulations and standards prescribed
in each country must be observed.
WARNING:
Never use any accessories other than those mentioned below.
The use of any accessories other than those mentioned below or attachments not intended for use such as
cup wheel, cut-off wheel or saw blade is dangerous and may cause personal injury or property damage.
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

Depressed center wheel ......................................................................................................................................... 1
4-1/2" (115 mm) external dia. × 1/4" (6 mm) thickness × 7/8" (22.23 mm) hole dia.
5" (125 mm) external dia. × 1/4" (6 mm) thickness × 7/8" (22.23 mm) hole dia.
6" (150 mm) external dia. × 1/4" (6 mm) thickness × 7/8" (22.23 mm) hole dia.
Wrench .................................................................................................................................................................... 1
Side Handle (Code No. 956633) ............................................................................................................................. 1
NOTE:
Specifications are subject to change without any obligation on the part of the HITACHI.
14
MODIFICATIONS:
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest
technological advancements.
Accordingly, some parts may be changed without
prior notice.

ACCESSORIES

(Code No. 701045) ...................................................... G12VA
(Code No. 701050) ...................................................... G13VA
(Code No. 316823) ...................................................... G15VA
(Code No. 938332Z) ...................................... G12VA, G13VA
(Code No. 325491) ...................................................... G15VA