Double Insulation For Safer; Operation - Hitachi G 10SR3 Instructions De Sécurité Et Mode D'emploi

English
DDOUBLE INSULATION FOR SAFER

OPERATION

To ensure safer operation of this power tool, HITACHI
has adopted a double insulation design. "Double
insulation" means that two physically separated
insulation systems have been used to insulate the
electrically conductive materials connected to the power
supply from the outer frame handled by the operator.
Therefore, either the symbol "
insulation" appear on the power tool or on the nameplate.
Although this system has no external grounding, you
must still follow the normal electrical safety precautions
given in this Instruction Manual, including not using the
power tool in wet environments.
To keep the double insulation system effective, follow
these precautions:
MAKE THEM AVAILABLE TO OTHER USERS
6
" or the words "Double
SAVE THESE INSTRUCTIONS
AND
AND
OWNERS OF THIS TOOL!
Only HITACHI AUTHORIZED SERVICE CENTER
should disassemble or assemble this power tool,
and only genuine HITACHI replacement parts
should be installed.
Clean the exterior of the power tool only with a
soft cloth moistened with soapy water, and dry
thoroughly.
Never use solvents, gasoline or thinners on plastic
components; otherwise the plastic may dissolve.