Extra Information; Troubleshooting; Troubleshooting Table - Inventum VVW6008AW Manuel D'utilisation

8

Extra information

WATER HARDNESS LEVEL SETTINGS (SALT CONSUMPTION)
Level German hardness
[dH]
1 0-5
2 6-11
3 12-17
4 18-22
5 23-34
6 35-50
RINSE AID CONSUMPTION SETTINGS
Level Number of rinse aid doses that is dispensed
1 Rinse aid not dispensed
2 1 dose
3 2 doses
4 3 doses
5 4 doses
9

Troubleshooting

GENERAL TROUBLESHOOTING PROCEDURE
1. Try to find a solution for the problem with the help of the troubleshooting table and the fault codes.
2. If you cannot find a solution for the problem, reset the appliance. Refer to section
3. If the fault code keeps re-occuring, contact the Inventum-servicedienst.

TROUBLESHOOTING TABLE

Problem
The program does not start.
50 • English
French hardness [dF] British hardness [dE]
0-9 0-6
10-20 7-14
21-30 15-21
31-40 22-28
41-60 29-42
61-90 43-63
Possible cause
The mains plug is not connected.
There is a problem with the fuse.
There is no water supply.
The door of the appliance is open.
The appliance is switched off.
The water inlet hose and filters are
clogged.
Indicator on
Program-step indicator Wash
Program-step indicator Dry
Program-step indicator End
Program-step indicators Wash
and Dry
Program-step indicators Wash
and End
Program-step indicators Dry
and End
Indicator on
Program-step indicator Wash
Program-step indicator Dry
Program-step indicator End
Program-step indicators Wash and Dry
Program-step indicators Wash and End
'Resetting the program'
Possible solution
Connect the mains plug.
Do a check on the fuse box.
Open the water tap.
Close the door.
Start the appliance. Refer to section
'Starting the appliance'
Make sure that the water inlet hose
and the filters are not clogged.
.
.