Draining The Pump; Extra Information - Inventum VVW7040++ Manuel D'utilisation

3. Remove the upper spray arm (B).
4. Pull the lower spray arm (C) upwards to remove it.
5. Clean the spray arms. Use warm water.
6. Install the lower spray arm (C).
7. Install the upper spray arm (B).
8. Tighten the nut (A).

DRAINING THE PUMP

Food residue or foreign objects that were not captured by the filters can cause the waste water pump to block. The
rinsing water level will be above the filter. Drain the pump to remove the blockage.
Warning:
Broken glass or sharp objects can cause injuries.
1. Make sure that the appliance is disconnected.
2. Remove the lower basket.
3. Remove the filters. Refer to setion
4. Remove the excess water. Use a sponge or cloth.
5. Remove the blockage.
6. Install the filters.
8

Extra information

WATER HARDNESS LEVEL SETTINGS (SALT CONSUMPTION)
Level German hardness
[dH]
1 0-5
2 6-11
3 12-17
4 18-22
5 23-31
6 32-50
RINSE AID CONSUMPTION SETTINGS
Level Number of rinse aid doses that is dispensed
1 Rinse aid not dispensed
2 1 dose
3 2 doses
4 3 doses
5 4 doses
50 • English
'Cleaning the filters'
.
French hardness
[dF]
0-9
10-20
21-30
31-40
41-55
56-90
British hardness [dE] Display indicator
0-6 L1
7-14 L2
15-21 L3
22-28 L4
29-39 L5
40-63 L6
Display indicator
r1
r2
r3
r4
r5
(Figure 27)