How The Pet Fencing System Works - Num'axes Canifugue Mix FUG1033 Guide D'utilisation

Warning area indicator
Stimulation area
indicator
Nylon strap
Indicator light:
On/Off indicator
+
battery level indicator

How the pet fencing system works

•
You can define your dog's play area by installing a wire, called antenna wire, around the authorized perimeter. This wire placed
on the ground, buried or raised on an existing fence carries a radio signal from the transmitter.
When your dog, wearing a receiver collar, approaches this wire, he is warned by beep sounds that he is too close to an area
where he is not allowed; then if he carries on, static stimulations will be emitted by the collar. Your dog will have to leave the
unauthorized area to stop the stimulations and beep sounds.
An unlimited number of receiver collars can be used with one transmitter: you can keep as many dogs as
you wish safely in the same area.
The CANIFUGUE MIX pet fencing system has been designed to give you complete satisfaction with an antenna wire with a
maximum length of 800 meters (equivalent to four square hectares). If a longer antenna wire is used, the pet fencing system
will still work, but the warning and stimulation zones will be markedly reduced.
guide canifugue MIX FUG1033 IndB.indd 24
Diagram 2 – LCD screen
Contact points
(short or long)
24
Small / large ground
indicator
Broken antenna wire
or connection default
indicator
Diagram 3 – Receiver collar
symbol:
area where the magnetic switch is
located.
This magnetic switch allows you to
turn On/Off the collar and to select the
stimulation level.
02/04/2019 11:01