Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en
Finish vacuuming: if vacuuming
started from the base station
The robot vacuum cleaner will return to
the base station automatically and
recharge.
The robot vacuum cleaner will return
to the base station and recharge even
when there is low battery capacity.
II will appear in the clock display. The
robot vacuum cleaner will then con-
tinue vacuuming from the point at
which it was interrupted.
Finish vacuuming: if vacuuming
started from somewhere in the room
The robot vacuum cleaner will return to
its starting point and switch into
standby.
The robot vacuum cleaner will stand
still when there is low battery capacity.
You should then recharge it.
Manually controlled vacuuming
You can use the direction buttons on
the remote control to vacuum a particu-
lar area of the room.
While the robot vacuum cleaner is
vacuuming, press and hold one of the
direction buttons.
The robot vacuum cleaner will turn in
the desired direction.
Press and hold the + direction button.
16
The robot vacuum cleaner will travel in
the desired direction and continue to
vacuum.
Interrupting vacuuming
Press the button on the remote
control.
Press the button again to continue vac-
uuming.
Manual navigation (without vacuum-
ing)
You can use the direction buttons on
the remote control to direct the robot
vacuum cleaner to a specific area of the
room.
Press and hold one of the direction
buttons.
The robot vacuum cleaner will travel in
the desired direction without vacuum-
ing.
You cannot direct the robot vacuum
cleaner manually to the base station in
order to recharge it.
Directing the robot vacuum cleaner
to the base station
Press the Base button on the remote
control.
Publicité
Chapitres
Table des Matières
