Technical Specification - Elem Garden Technic CBE1201 Traduction Des Instructions D'origine

TECHNICAL SPECIFICATION

Voltage
Power input
No load speed
Line diameter
Cutting width
Net weight
Cable length
Weighted sound pressure level
Weighted sound power level
Guaranteed weight sound power level
Vibration
The declared vibration total value has been measured in accordance with a standard test method and
may be used for comparing one tool with another that the declared vibration total value may also be used in a
preliminary assessment of exposure.
A warning that the vibration emission during actual use of the power tool can differ from the declared
total value depending on the ways in which the tool is used and of the need to identify safety measures to
protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account
of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time).
The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.
230-240 V~ 50 Hz
n
0
74,6 dB(A) K=3dB
94,6 dB(A) K=3dB
2.022 m/s² K=1.5m/s²
ATTENTION !
1200 W
-1
:7000 min
1.4 mm
350 mm
4,4 kg
0,35 m
96 dB(A)