EIBENSTOCK EST 350.2 Notice Originale page 14

Technical Data
Steintrennsäge
Rated voltage:
Power input:
Order Number:
Frequency:
No-load speed:
Max. disc diameter:
Spindle connection:
Cutting height max :
Cutting length at 90° max.:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
Available accesories:
Diamond cutting disc Ø350mm
Folding table with board
Industrial Vacuum Cleaner DSS 35 M iP
Content of Delivery
Stone dicing saw EST 350.2 with diamond cutting disc, angled stop, tool kit
and operating instructions in a cardboard box.
Application for Indented Purpose
The Stone dicing saw is indented for professional use.
The machine has to be used only completely mounted according to the
mounting instructions.
In connection with an industrial-scale vacuum cleaner (dust category M) with
at least 1200W and with the corresponding diamond dicing disc it serves for
low-dust cutting of bricks, concrete paving stones, as well as other concrete
stone plates without the use of any water.
Only use diamond cutting discs recommended by the manufacturer.
EST 350.2
50 / 60 Hz
3900 rpm
350 mm
Ø 25.4 mm
120 mm
250 mm
II
IP 20
ca. 19 kg
EN 55014 and EN 61000
14
230 V ~
2400 W
06637000
Ordernumber:
37471000
37473000
09919000